Anaerobic digestion · RNG · BMP

Screen digester feedstocks and estimate RNG yield

From feedstock list to RNG estimate in about five minutes, with traceable BMP evidence and documented model assumptions. Built for screening and preliminary sizing, before you commission a feasibility study: an evidence-graded methane-potential library, a co-digestion model, the gas chain to RNG, a blend optimizer, uncertainty bands, a BMP lab and reports.

Three ways in: screen a project from a feedstock list · process a BMP test and use its results · compare and optimise feed blends.

Two hours, one full case study, no card needed. Already a subscriber? Sign in.

  • 164 feedstocks
  • 1,011 graded BMP records (8 A · 151 B · 852 C)
  • P90–P10 uncertainty
  • Blend optimizer
  • PDF · Word · Excel reports
digestimate.ca/app
Digestimate's project workspace: the sidebar, the project summary and the home page of the dairy-farm case study
Overview

Digestimate in one minute

From a feedstock list to an RNG estimate, its likely range and a report you can hand over.

Inside the app

A control room for your digester idea

Screenshots captured from the built-in case studies.

An evidence-graded feedstock library

Every feedstock carries total and volatile solids, methane potential (BMP) with a low–typical–high range, kinetics and minerals. Each one shows how many studies stand behind it and how strong they are, so you know which numbers to confirm in the lab.

An evidence-graded feedstock library
How it works

Three steps, no gate between them

Move freely between steps; the results update as you change any input.

  1. 1

    Pick the feedstocks

    Search the library or enter your own lab values. Edited values are flagged so nobody mistakes them for library data.

  2. 2

    Size the digester

    Set the amounts, volume, temperature and configuration. Cautions appear as you go, not after you finish.

  3. 3

    Read the results

    RNG with its likely range, the constraint that limits it, scenarios, and a report you can hand to a colleague.

Features

What is in the box

Evidence-graded library

Feedstock values traced to published BMP records, each graded A, B or C, with the strength of evidence shown wherever the value is used.

Co-digestion digester model

Steady-state CSTR or plug flow with first-order or two-pool kinetics, COD and mass balances, ammonia inhibition, an optional second stage, recuperative thickening with the recycle, wastage and filtrate it needs, and calibration to your plant’s metered gas.

Gas chain to RNG

Methane losses, clean-up recovery and upgrading technology, with methane slip reported and every cubic metre accounted for.

Process checks

Washout margin, organic loading, ammonia and H₂S, each explained with its source and, where possible, a fix sized to clear it that you preview before anything changes.

Digestate and minerals

Critical compounds in the digestate, the separated liquid (mg/L) and the cake (mg/kg dry solids): ammonia, phosphate, sulfide and metals, with iron dosing for H₂S, struvite estimates and their uncertainty.

Uncertainty and drivers

Monte Carlo P90–P10 bands and one-at-a-time sensitivity, disclosed as screening ranges rather than confidence intervals.

Blend optimizer

The maximum-production, lower-risk and best-evidence blends within your digester’s limits, with the reasons, the limiting constraint and advice for each.

BMP lab

Instrument-neutral: copy laboratory BMP readings into the Excel template, check them against quality criteria and add the measured feedstock to your project.

Kinetic models

First-order, two-pool, modified Gompertz and logistic fits with an AICc recommendation, residual checks and replicate intervals.

Scenarios

Pin a base case and compare alternatives with RNG, P90 and the margin left to every process limit.

Reports and exports

PDF and Word reports with the process drawing, assumptions and references, plus Excel and CSV exports of the numbers.

Guided tour and demo

A two-hour guided demo before you subscribe and a step-by-step tour of every feature, in light or dark, metric or US units, on desktop or phone.

Built forProject developersConsulting engineersPlant operatorsLaboratoriesUtilities and municipalitiesResearchers and students

Your projects stay on your device

Projects are saved as files on your computer, not uploaded to the server.

Individual, secure accounts

Every user has their own sign-in, one session at a time, with automatic sign-out when idle.

Honest about uncertainty

Ranges are disclosed as screening assumptions, and thin evidence is flagged where it is used.

Pricing

One product, every feature, priced by seats

No feature tiers: every subscription includes the full library, model, uncertainty, BMP lab and reports. Each seat is a named user with their own sign-in.

1 seat$1,300 CAD / year$108.33 per seat-month
2 seats$2,160 CAD / year$90.00 per seat-month
3 seats$2,400 CAD / year$66.67 per seat-month
4 seats$2,700 CAD / year$56.25 per seat-month

Subscription prices are displayed in Canadian dollars (CAD) for customers in Canada and US dollars (USD) for customers outside Canada. Applicable taxes are calculated and added at checkout. Payments, receipts and subscription billing are securely managed by Stripe; your card statement shows LINK.COM* DIGESTIMATE. Subscriptions renew automatically until cancelled. You pay by card on a secure checkout page run by our payment provider, and your account is ready as soon as the payment completes. Not sure yet? Try the guided demo first. Questions about plans, a team licence or invoicing? Email support@digestimate.ca.

FAQ

Questions

Screen the next digester idea before you commission the study.